NITECORE I4 INTELLICHARGER – 4 BAY BATTERY CHARGER
Designed and built upon the successful foundation laid by its predecessor, the NEW i4 is a charger featuring state of the art design and functionalities. It is designed to work immaculately with a large variety of rechargeable batteries, and is capable of charging 4 batteries simultaneously. With its accelerated charging rate up to 1.5A, fully charging large capacity batteries will no longer be a dreadful process. The ingenious Active Current Distribution (ACD) technology allows the NEW i4 to bring the entire charging process to an orderly manner depending on user preferences. The new technologies incorporated allows it to distinguish non-rechargeable batteries from rechargeable ones, and the NEW i4 adopts the appropriate charging mode for different battery types and capacities. Users may also configure its settings to suit their individual needs. Four independent indicators provide real time feedback on battery status.
4 Bay Charger
Multiple charging speeds – .375A x 4, .5A x 2, .75A x 2, or 1.5A x 1
LEDs show the charging status of each cell
Automatically turns off when charging is complete
Reverse polarity protection protects if cell is entered in the wrong way
Nitecore i4 Intellicharger
Standard USA Power Cable
Active Current Distribution (ACD) Technology
Compatible with 1.2V, 3.7V, 4.2V, 4.35V batteries
Charging program optimized for IMR batteries
Automatic current selection based on battery capacity
Automatic detection of non-rechargeable Lithium batteries
Terminating threshold for battery voltages and charging current can be set independently for each slot
Capable of charging four batteries simultaneously
Automatic adoption between three charging modes (CC, CV, and dV/dt)
Automatically detects battery power status and displays charging progress
Automatically stops charging upon charging completion
Reverse polarity protection and short circuit prevention
Over-discharged battery recovery
Overtime charging protection
Designed for optimal heat dissipation
Made from fire resistant, flame retardant PC material
Certified by RoHS, CE, FCC and CEC
Insured worldwide by Ping An Insurance (Group) Company of China, Ltd.
Input Voltage: AC 100~240V 50/60Hz 0.25A (max) 10W DC 9~12V 1A
Output voltage: 4.35V±1% / 4.2V±1% / 3.7V±1% / 1.48V±1%
Output current: 1.5A x 1 / 0.75A x 2 / 0.5A x 2 / 0.375A x 4
Li-ion / IMR / LiFePO4:
10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500,18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650
Ni-MH / NiCd:
AA, AAA, AAAA, C, D
Dimensions: 140mm × 94.8mm × 37mm
Weight: 202g (without batteries and power cord)
Helpful hints for your new charger!
– Place your charger in a flat well-ventilated area.
– Match the positive and negative ends of your batteries to the corresponding contacts on your charger.
– When placing the battery on the charger, use your finger to slide the battery contact back, not your battery.
– Charge your batteries on the lowest amperage setting possible.
– Do not leave batteries on the charger unattended.
– Remove your batteries when they are fully charged and store them in a protective silicone cover.
– When removing your batteries from the charger do not allow your adjustable contact to snap back.
– Only use the charging cable supplied with your charger.
– Stay hydrated!!!!