NITECORE NEW I2 18650 BATTERY CHARGER
The Nitecore NEW i2, an upgraded edition of the original i2 by Nitecore, is a charger with compatibility, efficiency, and intelligence.
It works with almost all types of rechargeable batteries, including 1.2V, 3.7V, 4.2V, and 4.35V batteries, eliminating the need to own several chargers.
The NEW i2 is able to charge batteries TWICE as fast as the i2 (up to 1A). With Active Current Distribution (ACD) technology, the NEW i2 automatically identifies battery types and capacity, and applies an appropriate charging current based on automatic detection or manual setting.
It can even restore your depleted IMR battery! With automatic detection of non-rechargeable batteries, safety is no problem for the NEW i2. Additionally, yellow, red, and green power / charging status indicator LEDs visibly show battery status and charging process. NEW i2: it’s as simple as insert, detect, and charge.
2 Bay Charger
Capable of 2 Charging Speeds – 1A x 1 or .5A x 2
LEDs show the charging status of each cell
Automatically turns off when charging is complete
Reverse polarity protection protects if cell is entered in the wrong way
Nitecore NEW i2 Battery Charger
Standard USA Power Cable
Active Current Distribution (ACD) Technology
Compatible with 1.2V, 3.7V, 4.2V, 4.35V batteries
Charging program optimized for IMR batteries
Automatic current selection based on battery capacity
Automatic detection of non-rechargeable Lithium batteries
Capable of charging two batteries
Two charging slots charge and control independently
Automatically detects battery power status and displays charging progress
Automatically stops charging upon charging completion
Reverse polarity protection and short circuit prevention
Over-discharged battery activation
Overtime charging protection
Designed for optimal heat dissipation
Made from fire resistant, flame retardant PC material
Certified by RoHS, CE, FCC and CEC
Insured worldwide by Ping An Insurance (Group) Company of China, Ltd.
Input Voltage: AC 100~240V 50/60Hz 0.25A(max) 8W DC 9~12V
Output voltage: 4.35V±1%/4.2V±1%/ 3.7V±1%/1.48V±1%
Output current: 500mA×2/1000mA ×1
Li-ion / IMR / LiFePO4:
10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500,18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650
Ni-MH / NiCd:
AA, AAA, AAAA, C, D
Dimensions: 132mm × 70mm × 35mm
Weight: 126g (without batteries and power cord)
Helpful hints for your new charger!
– Place your charger in a flat well-ventilated area.
– Match the positive and negative ends of your batteries to the corresponding contacts on your charger.
– When placing the battery on the charger, use your finger to slide the battery contact back, not your battery.
– Charge your batteries on the lowest amperage setting possible.
– Do not leave batteries on the charger unattended.
– Remove your batteries when they are fully charged and store them in a protective silicone cover.
– When removing your batteries from the charger do not allow your adjustable contact to snap back.
– Only use the charging cable supplied with your charger.
– Stay hydrated!!!!