The Aegis X Mod by Geekvape is a regulated box mod. It features a 5-200W range, a comprehensive temperature control system, and an IP67 protection rating. The Aegis X requires 2 high-amp 18650 for power and utilizes an AS2.0 chipset for rapid activation.
Warning: This device’s USB port is for firmware updates only, do NOT charge external batteries through your device’s update port.
– 1x Aegis X mod
– 1x Micro-USB Update Cable
– 1x User Manual
– 1x User Manual
– 1x Spare Parts Pack
– 1x Promo Card
– 1x Warranty Card
– Battery Compatibility: 2 x 18650 (sold separately)
– Dimensions: 90 x 56.1 x 31.3mm
– IP67 Rating – Water/Shock/Dust Proofing
– Output modes: VW / TC (Ni, Ti, SS)
– Output wattage: 5-200W
– Resistance range: 0.05-3.0ohm
– OLED Display Screen
– Single Firing Button
– Two Adjustment Buttons
– Bottom Hinge Battery Door
– 510 Threaded Connection
Helpful hints for your new internal battery mod!
– Familiarize yourself with the functions and digital display of your device.
– Clean your device on a regular basis by wiping any excess liquid off of the contact and the device itself.
Use a Q-tip or a tissue.
– Charge your device in a flat, well-ventilated area. Do not leave it unattended while charging. Remove when fully charged.
– Only use the charging cable supplied with your device.
– Only use a 1-amp (or lower) charging block.
– Do not use the device while it is charging.
– Store your device in a cool dry place.
– Stay hydrated!!!!
WARNING: LI-ION CELLS HAVE INHERENT RISKS IF MISUSED OR MISHANDLED. CELL CAN EXPLODE CAUSING SEVERE BURN INJURY, FATALITY, AND PROPERTY DAMAGE. – READ BELOW THOROUGHLY –
CELL = BATTERY
KEEP OUT OF REACH of anyone under 18 years of age, AND pets.
DO NOT PUT IN FIRE, oven, microwave, or expose to anything over 100oC (212oF)
DO NOT CARRY or store OUTSIDE of its protective packaging or a PROTECTIVE CELL CASE.
DO NOT PUT IN POCKET, bag, purse, or anywhere WITH METAL OBJECTS including COINS and KEYS. Otherwise, cell(s) could short-circuit and explode.
DO NOT PUT A DEVICE WITH CELL(S) INSTALLED IN POCKET or ON YOUR BODY. As unlikely as it may be, a device can malfunction, have a defect, internal damage, and/or be affected by conductive debris or object(s) in pocket that can overload or short-circuit cell causing it to explode.
DO NOT USE IN A DEVICE THAT CAN EXCEED MAX CELL WATTAGE (W) or AMPERAGE (A) (listed on each cell and retail packaging). Otherwise, this can overload a cell, causing it to explode.
DO NOT USE A LOWER RESISTANCE (Ω) # (listed on each cell and retail packaging). Otherwise, this can overload cell, causing it to explode.
DO NOT USE CELL WITH ANY DAMAGE TO ITS STRUCTURE OR OUTER PROTECTIVE LABEL (also called “WRAP”, “sleeve”, “skin”). Damage may include: dent(s), tear(s), nick(s), puncture(s), corrosion, or any other undisclosed abnormalities or damages. Otherwise, a cell can short-circuit and explode. ALWAYS INSPECT cell VISUALLY and by TOUCH to SEE/FEEL for damage BEFORE EACH USE. ** SEE PHOTO GALLERY ILLUSTRATION AS GUIDELINE. **
DO NOT LEAVE UNATTENDED WHILE CHARGING, & REMOVE CELL(s) FROM CHARGER ONCE FULLY CHARGED to ensure it is not exposed to any potential charger malfunction such as overcharging which could damage cell causing it to explode.
DO NOT CHARGE HIGHER THAN MAX CHARGE VOLTAGE (V) (typically 4.2V) or DISCHARGE BELOW MAX VOLTAGE CUT-OFF(V) (typically 2.5V). Overcharging or over-discharging cell(s) can cause irreversible damage and cause it to explode.
DO NOT MIX WITH USED or DIFFERENT BATTERY TYPES. Differences in cell capacity can lead to one or more cell(s) being overcharged or over-discharged.
IF USING A MULTI-CELL DEVICE, the device MUST HAVE A NON-CONDUCTIVE BARRIER (typically plastic) OR FITMENT that PREVENTS CELL(S) from TOUCHING THE SIDE(S) OF ONE ANOTHER OR ANY ADJACENT METAL except for the very center of top and bottom of the cell. Otherwise, cell(s) could short-circuit and explode.
ALWAYS use, connect, charge, and operate cell(s) within their capabilities as listed on each cell, packaging, and product detail pages, while adhering to the device’s user manual.
COMPLETELY READ and follow the WARNING section listed on each cell, packaging, and here, in its entirety.
SEARCH www.YouTube.com for “18650 EXPLOSIONS” to understand the importance of consistently taking safety precautions and using Li-ion cells properly. Hohm Tech advocates recycling and replacing any damaged Li-ion cell/battery. As a tool to find your LOCAL RECYCLE CENTER. Or visit Hohm Tech Warranty Center for recycling and replacement. Your safety is #1.